
Add to Cart
Zongshen XP160 carburetor choke thermostat assembly
Initial Angle:0-5°
Starting Temperature:20-25℃
Rotation Angle:
-At 40℃ temp., more than 15°
-At 5℃ temp. ,more than 18°
Type | Choke thermostat |
Use | XP1604 carburetor |
Temperature | 20-25℃ |
Choke thermostat how to work
Choke thermostat is the part of the carburetor that controls the operation of the choke. The choke is a valve that regulates the flow of air into the carb. This is especially useful during cold starts because it limits airflow, which enriches the mixture in the carburetor and makes starting in cold temperatures easy.
A standard component in vehicles with carburetor and ignition coil systems, the choke thermostat controls the idle of the vehicle by opening or closing the butterfly valve on top of the carburetor when the temperature rises or lowers respectively. This allows more or less airflow depending on the temperature of the engine. But while it is designed to work in hot temperatures, choke thermostats are exceptionally vulnerable to heat damage. And once they burn out, the thermostat must be replaced.
PRODUCT GURANTEE POLICY
For the period of two years or 50,000 kilometers,whichever occcurs first,from the date of shipment,any shock absorber from CHONGQING SKILL SCIENCE&TECHNOLOGY CO.,LTD,found to be defrctive in material or workmanship in below cases,we will replace without charge,or return the equal money back:
1.Installation sizes are wrong;
2.Oil or gas leakage;
3.Iron was rusty after painting;
4.welding position discount;
5.Damping force was out of test report range,±20% damping force rate (National sdandard) should be allowed and born by the purchaser;
6.0.5% of failure rate should be allowed.